10.07.2025 *
12.07.2025 *
12.07.2025 *
* Delivery times are approximate..
Can flexible mean better?
A slight thickness of only 0.28mm and full coverage of the screen makes the Hofi hybrid glass almost invisible.
Hardness of 7H achieved thanks to the ceramic coatings used.
These are the features of a hybrid of glass and film, which means not only high resistance to pressure or scratches, but also full touch sensitivity and perfect clarity and image saturation.
And finally, the most important, the biggest advantage of the product - it does not crack or shatter, unlike traditional tempered glass!
Check out how to install:
https://www.youtube.com/watch?v=j5WIzyY5AzA
INSTALLATION INSTRUCTIONS:
1. Installation of this model of glass looks different from traditional ordinary tempered glass - on a thin adhesive layer, it is slightly more difficult due to a thicker adhesive layer.
2.At the initial stage of application, there may remain trapped under the glass bubbles or air strips, which need to be brought out with repeated movements to the edge, but the easiest way in this case is to peel off the coating to the place of the air bubble and stick again, bringing out the air, for example, with an ATM card.
3 You also need to remember that due to the curvature, the curvature of the glass must coincide with the curvature of the screen.
If the glass does not stick on either side, it means that it has been glued crookedly, in which case you will have to peel off and retry the installation until it does.
Due to the polishing and milling of the screen, this requires up to a few minutes of work in some cases, but the correct final result is stunning.
PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- Surface hardness 7H
- Thickness of 0.28mm
- Retains full touch sensitivity
- Precise fit
- Dimensions: ø40mm
SET INCLUDES:
1 x Hofi Hybrid Pro+ glass
1 x Installation kit
