Mobile Origin Cleaning Brush Kit 9in1 CL3

Mobile Origin Multifunctional Cleaning Kit 9-in-1 CL3

Multifunctional Cleaning Kit 9-in-1 CL3 combines nine cleaning tools in a single flat body measuring 153 x 55 x 14 mm. The main part is a wide brush mounted on an extendable rod, which handles a whole row of keys in one pass as well as surfaces beyond the reach of a short brush. The rest of the kit is aimed at detail: the charging port, the speaker grille, the gaps between keys or a SIM card swap.

• Extendable rod: the brush reaches the keyboard and the top edge of a monitor without leaning over the desk.
• Flat brush head: the rectangular shape sweeps dust off a whole row of keys in one pass.
• Nine tools in one body: SIM pin, keycap puller, shaft puller and microfiber cloth all stay together.
• Cleaning pen with two ends: a metal tip for the charging port and a flocked sponge for the speaker grille or an earphone case.
• Format of 153 x 55 x 14 mm and weight of 26 g: the kit fits into a laptop bag next to the machine itself.

Extendable rod and reach across the whole keyboard

The head has a rectangular shape instead of a round bundle of bristles, so one pass covers a whole row of keys. The bristles are soft and densely set, so they collect and carry dust away instead of scattering it across the desk. Reach is handled by an extendable rod that fits into the head: without it you hold the head like a pencil for work on a small area, with the rod extended you guide it like a small broom at a distance from the surface. For a laptop keyboard right in front of you the head alone is enough, while the rod pays off with a keyboard lying on a desk, an external monitor or a shelf full of gear, where you would otherwise be cleaning in small sections with your hand right above the surface. The top side of the head carries a microfiber cloth: once the dust is swept away, just turn the brush over and wipe the display or the laptop lid without reaching for another cloth. For the deep gaps between the keys of a mechanical keyboard the head is wide, and those are handled by the earphone brush and the pen tip from the same kit.

Nine tools in one kit

The kit contains nine tools and all of them are stored back in a single body, so nothing is left loose in a drawer. Besides the brush and the pen there are parts that usually have to be looked for separately: a SIM pin, a keycap puller and a shaft puller for mechanical keyboards. The range therefore covers the keyboard, display, earphones and connectors of one workspace.

• Large cleaning brush with a flat head: keyboard, desk, shelf with electronics.
• Microfiber cloth on the top side of the head: display, laptop lid, glasses.
• Extendable rod: reach over the keyboard and other surfaces.
• Earphone brush: grilles, case edges and narrow gaps.
• Cleaning pen: metal tip for ports and grilles.
• Flocked sponge: the soft end of the pen for delicate surfaces.
• Keycap puller: removing a keycap without prying with a screwdriver.
• Shaft puller: pulling out a switch on mechanical keyboards.
• SIM pin: opening the SIM card slot.

Cleaning pen with two ends

The pen has a thin metal tip on one end and a flocked sponge on the other. The tip picks compacted dust out of a phone's charging port or out of the recesses in a wireless earphone case, where bristles cannot reach. The sponge collects fine dust and grease from surfaces where metal would scratch: the speaker grille or the seating surface of a charging case. In a port, guide the tip along the walls of the connector and without pressure, so the contacts stay untouched.

Detachable pen handle

The pen has two working lengths. With the handle attached, the pen is as long as an ordinary pencil, which helps when cleaning between keys, where you need to see the tip from a greater distance. Removing the handle shortens the tool to a few centimetres and moves the grip closer to the tip, so it can be guided millimetre by millimetre. That is the position for work inside an earphone charging case or right around a connector.

Dimensions and carrying

Folded up, the kit measures 153 x 55 x 14 mm and weighs 26 g. Those fourteen millimetres of thickness decide where it fits: besides a drawer, also into the side pocket of a backpack or into a laptop bag next to the machine itself. The body is made of black ABS plastic and the individual tools are stored back inside it, so no loose pieces are left in the bag. The kit contains no electronics and no cleaning liquid, so it needs no charging and no refilling.

Specifications

Number of tools: 9

Dimensions: 153 × 55 × 14 mm

Weight: 26 g

Body material: ABS

Colour: black

Warranty: 24 months

Package Contents

1× Mobile Origin Multifunctional Cleaning Kit 9-in-1 CL3

User manual