Русский
+371 27 277 707
Каталог
AnyCubic Код: 256353

AnyCubic Wash & Cure 3 - Print cleaning and drying device

89.22 € / шт.
На складе поставщика: >5

Доставка

Латвия
Вывоз с магазина
26.11.2026 *
Бесплатно
Получить пакомат
27.11.2026 *
2.41 €
Доставка курьером
27.11.2026 *
4.99 €
* Дата получения товара приблизительная.
Описание

AnyCubic Wash & Cure 3 print cleaning and drying device.


Take care of the proper finishing and curing of your 3D prints. The AnyCubic Wash & Cure 3 washing and drying device features an enlarged design that makes it great for models of different sizes. It allows cleaning both in a basket and with a platform. In doing so, it works surprisingly quietly and offers several operating modes to choose from. You can also manually adjust the cleaning and curing times.




It even accommodates larger prints


The capacity of the device's basket is 3 l, and the total capacity of its cleaning module is as much as 4 l. Thus, with its help you can easily clean prints up to 165 x 100 x 180 mm (in the basket) or up to 165 x 100 x 165 mm (with the platform). On the other hand, the dimensions of the curing space are 160 x 180 mm.




Ideal for curing


The device is distinguished by its carefully thought-out design and optimized arrangement of LEDs to ensure comprehensive, even curing of models. You will also find in the set an additional UV lamp with a bendable design, which is distinguished by an energy level of 30,000 μW/cm2 and a radiation range from 1 cm to 3 cm. With its help you will successfully cure, for example, selected details of prints.




Improved design, higher efficiency


The device's basket was made of rust-resistant double-layer PP plastic, and thanks to its improved design, it allows you to clean prints placed on the platform. It also allows you to choose from 2 heights - 100 mm and 165 mm. So you can adjust it to the size of your model to optimize IPA consumption.




Convenient operation


The device allows you to choose from 3 modes of operation, such as washing, curing and FlexiCure enhanced curing using the included UV lamp. You can also adjust the cleaning and drying time from 1 minute to 30 minutes. The Wash & Cure 3 model is operated with a convenient-to-use dial and touch-sensitive buttons.




Low noise level


Don't be afraid of annoying noise. The Wash & Cure 3 model features a sealed design and optimized software, so it can deliver exceptional performance while keeping the noise level low - only about 65 dB. Relax or get on with your work while the device washes and cures your prints - nothing will disturb you.





Included


  • Print washing and drying unit
  • Cleaning module
  • Cleaning basket
  • Stick x4
  • Curing table
  • UV lamp with bendable design
  • Allen wrench set
  • Power supply
  • User manual






ManufacturerAnyCubicModelWS3A0WH-Y-OUV light source10 diodes 405 nm + lamp with adjustable designOperation modesCleaning, curing, FlexiCureRated power36 WInput voltage100-240 V 50/60 HzCleaning / curing time adjustment1-30 minMax. dimensions of the model to be curedø160 x 180 mmMax. dimensions of the model to be cleanedWith platform: 165 x 100 x 165 mm; Without platform: 165 x 100 x 180 mm;Control panelTouch buttons, dialMaterial (cleaning basket, cleaning module, curing table)PPUV lamp height285 mmDimensions216 x 217 x 310 mmWeight2.7 kg
Отзывы покупателей

Отзывов пока нет — отзыв можно написать из своего заказа после покупки

Доставка и гарантия

Доставка
Пакомат
Курьер
Самовывоз из магазина
Гарантия
Гарантия производителя
Официальный дистрибьютор
Чек и гарантийный талон в комплекте
Возврат
Право отказа в течение 14 дней
Гарантия возврата денег
Бесплатный возврат при браке

Похожие товары

Посмотреть все
Anycubic Kobra S1 Max Combo 3D Printer
На складе поставщика: >5
839.86 € / шт.
ANYCUBIC Kobra S1 ACE 2 Pro Combo 3D Printer
На складе поставщика: >5
490.98 € / шт.
Anycubic Kobra X Combo 3D Printer
На складе поставщика: >5
463.59 € / шт.
Anycubic Kobra X 3D Printer
На складе поставщика: >5
321.42 € / шт.
Anycubic Photon P1 3D Printer
На складе поставщика: >5
630.04 € / шт.
Anycubic Wash & Cure 3 Max 3D printing washing and curing system
На складе поставщика: >5
318.18 € / шт.
Christmas PLA Anycubic filament set (4 pcs).
На складе поставщика: >5
53.85 € / шт.
Filament PLA Anycubic 1 KG (Zielony)
На складе поставщика: >5
14.20 € / шт.
Корзина